Robotics Resources - Electronics Blog

Robotics Resources

This page is here to provide references to various robotics – related files and documents we have accumulated so far.

Eshed Robotec / Intelitek

manufacturer’s website

Questech / Micro Bot

manufacturer’s website

  • TeachMover II

    Here is a nice video circa 1983 that shows TechMoverII being worked by the CEO of the company that created it (Microbot, Inc.), thanks to YouTube user ckmogo for giving these bits of computer history a new life!

Tools

Coming soon ...

Recent Comments
  • admin: How did you measure the 225mA output? Did you connect 4 diodes (regular rectifier diodes, not laser of course)...
  • David: Hello. I have extracted a 5.6mm diode from a 16x DL dvd burner, I already have an AiXiz module and driver...
  • admin: Thank you for stopping by, Mark! If you are using the same hardware, just be sure to not overload the driver...
  • Mark N: Spot on. exactly what I want. Just a fwd/Rev speed control, stepper motor to drive the X axis on my Milling...
  • admin: That’s right – R4 pulls the Enable input of the chip down, and the driver will be off until...
  • Nate: I have a question on the R3/R4 and ttl. So you say that if R4 is installed its normally off. So the laser is...
  • admin: Thanks for stopping by, Tom. I don’t have a ready-made DXF but the Eagle board file attached above in...
  • admin: It does need to be on a ferrous material for a great increase in performance. Although I do believe you can...
  • Tom Batya: I know were you can get about 83 of these for $2.00 EA can you send me a DXF of the foil pattern of your...
  • Mayank: is it necessary to fix magnet on ferrous metal or it can also be fix on non ferrous metal.
Meta