blue laser diode

Posts Tagged ‘blue laser diode’

Blu-Ray Teardown – HP CT10L BD-ROM / DVD Rewriter

HP CT10L BD-ROM/DVD R/W drive , ready to be disassembled

HP CT10L BD-ROM/DVD R/W drive , ready to be disassembled

Even though it takes me much longer than I anticipated, I’m still collecting parts for the laser cutter based on broken CD/DVD/Blu-ray drives. This time I decided to open a Blu-ray drive for the first time, never had a working 405nm laser diode harvested from a Blu-ray drive before.

This time the broken drive teardown is performed on an HP CT10L BD-ROM/DVD Rewriter drive (HP part number HP nPC P/N:491775-6CO). This is an older drive (manufactured in October 2008) and I expected it to have some useful parts – my experience has been that the most useful for disassembly parts are usually from 2003-2008 time frame. I was surprised to find not only two useful laser diodes inside but also an interesting part I did not expect to be in there … Read the rest of this entry »

Tools

Coming soon ...

Recent Comments
  • Ron: One correction. The original 7200-BN bulbs were 2.5 watts. I also have 3 of the vented replacements left for...
  • Ron: I have some of the upgraded 7200LED-BN bulbs that LOA sent me a year or so after I installed 2 4-puck strings in...
  • Chisight: You seem to be trying to implement a constant current supply but the LT1121 doesn’t have a constant...
  • Joshua Donar: Would you happen to know where the driver is for the CT10L drive is? Haven’t been able to locate...
  • Albert: Hello Thank you for sharing Tell me please meaning D4 zener. Meaning the role in this schematic. Looks like...
  • Will: I also aquired a scorbot 3 without a controller and in my spare time I have been developing a simple servo...
  • YamZYang: Hello, I learned alot from here. I have a question about the H-bridge motor driver, are there any special...
  • John: I’m trying to use this code to rotate a 14-pole, 12-slot BLDC motor. However, I’m getting some very...
  • admin: The signal is most definitely a square wave of varying width. Its resulting torque might look like a sine wave...
  • Andrei: Hi there, Great article. Really helps to explain the BLDC control. I was thinking of a way to control a BLDC...
Meta

Database Error

Please try again. If you come back to this error screen, report the error to an administrator.
Back