scorbot

Posts Tagged ‘scorbot’

Fixing a Scorbot ER4-PC


No electronics lab can go for long without a robot eventually making its way in. Well, in my lab there is approx a dozen. Most are Scorbots by Eshed Robotec (Intelitek, Depco and there may be other names under which they were sold) These robots are usually rather old and by the time you get them they have been through a couple of generations of middle school students. But they were built solid and many survived, even if in need of repair. This is what this post is about Read the rest of this entry »

Tools

Coming soon ...

Recent Comments
  • Larry Siegfried: I almost forgot about your article and realized that I was on my “Last” Puck that I had...
  • rodrigo: hola estoy trabajando con un scorbot er3 mi duda es: que circuito implementaste para leer los pulsos del...
  • rodrigo: hello my name is rodrigo work with a scorbot er3 and my doubt is how you got the reading of the encoders the...
  • admin: The problem with 1/8th microsteps however, is that the difference in current (or PMW pulse width, depending on...
  • admin: (darn overly sensitive Mac mouse for wiping out LONG explanation, sorry I can’t bring myself to type all...
  • greg: Thanks for your reply. It all makes sense what you are saying, although I`m not totally sure what you mean the...
  • admin: Hi Greg, thanks for stopping by my blog. You can increase the motor voltage, to add torque, but I would not...
  • greg: Hi! Thanks for publishing this, very useful thread! I just built it exactly the same way to drive a small...
  • deadshot: can someone send me a link to the sites where i can buy those ic and the rest
  • Filippo: Hi, thank you for this post.. Very instructive. Actually I’d have some question.. I want to use a BLDC...
Meta