Recent Posts

Recent Posts

Pages: [1] 2 3 ... 10
1
Practical Explanation ( For Example ) :- `1st of all can you tell me every single seconds detail from that time when you born ?? ( i need every seconds detail ?? that what- what you have thought and done on every single second )

can you tell me every single detail of your `1 cheapest Minute Or your whole hour, day, week, month, year or your whole life ??

if you are not able to tell me about this life then what proof do you have that you didn't forget your past ? and that you will not forget this present life in the future ?

that is Fact that Supreme Lord Krishna exists but we posses no such intelligence to understand him.
there is also next life. and i already proved you that no scientist, no politician, no so-called intelligent man in this world is able to understand this Truth. cuz they are imagining. and you cannot imagine what is god, who is god, what is after life etc.
_______
for example :Your father existed before your birth. you cannot say that before your birth your father don,t exists.

So you have to ask from mother, "Who is my father?" And if she says, "This gentleman is your father," then it is all right. It is easy.
Otherwise, if you makes research, "Who is my father?" go on searching for life; you'll never find your father.

( now maybe...maybe you will say that i will search my father from D.N.A, or i will prove it by photo's, or many other thing's which i will get from my mother and prove it that who is my Real father.{ So you have to believe the authority. who is that authority ? she is your mother. you cannot claim of any photo's, D.N.A or many other things without authority ( or ur mother ).

if you will show D.N.A, photo's, and many other proofs from other women then your mother. then what is use of those proofs ??} )

same you have to follow real authority. "Whatever You have spoken, I accept it," Then there is no difficulty. And You are accepted by Devala, Narada, Vyasa, and You are speaking Yourself, and later on, all the acaryas have accepted. Then I'll follow.
I'll have to follow great personalities. The same reason mother says, this gentleman is my father. That's all. Finish business. Where is the necessity of making research? All authorities accept Krsna, the Supreme Personality of Godhead. You accept it; then your searching after God is finished.

Why should you waste your time?
_______
all that is you need is to hear from authority ( same like mother ). and i heard this truth from authority " Srila Prabhupada " he is my spiritual master.
im not talking these all things from my own.
___________

in this world no `1 can be Peace full. this is all along Fact.

cuz we all are suffering in this world 4 Problems which are Disease, Old age, Death, and Birth after Birth.

tell me are you really happy ?? you can,t be happy if you will ignore these 4 main problem. then still you will be Forced by Nature.
___________________

if you really want to be happy then follow these 6 Things which are No illicit s.ex, No g.ambling, No d.rugs ( No tea & coffee ), No meat-eating ( No onion & garlic's )

5th thing is whatever you eat `1st offer it to Supreme Lord Krishna. ( if you know it what is Guru parama-para then offer them food not direct Supreme Lord Krishna )

and 6th " Main Thing " is you have to Chant " hare krishna hare krishna krishna krishna hare hare hare rama hare rama rama rama hare hare ".
_______________________________
If your not able to follow these 4 things no illicit s.ex, no g.ambling, no d.rugs, no meat-eating then don,t worry but chanting of this holy name ( Hare Krishna Maha-Mantra ) is very-very and very important.

Chant " hare krishna hare krishna krishna krishna hare hare hare rama hare rama rama rama hare hare " and be happy.

if you still don,t believe on me then chant any other name for 5 Min's and chant this holy name for 5 Min's and you will see effect. i promise you it works And chanting at least 16 rounds ( each round of 108 beads ) of the Hare Krishna maha-mantra daily.
____________
Here is no Question of Holy Books quotes, Personal Experiences, Faith or Belief. i accept that Sometimes Faith is also Blind. Here is already Practical explanation which already proved that every`1 else in this world is nothing more then Busy Foolish and totally idiot.
_________________________
Source(s):
every `1 is already Blind in this world and if you will follow another Blind then you both will fall in hole. so try to follow that person who have Spiritual Eyes who can Guide you on Actual Right Path. ( my Authority & Guide is my Spiritual Master " Srila Prabhupada " )
_____________
if you want to see Actual Purpose of human life then see this link : ( triple w ( d . o . t ) asitis ( d . o . t ) c . o . m {Bookmark it })
read it complete. ( i promise only readers of this book that they { he/she } will get every single answer which they want to know about why im in this material world, who im, what will happen after this life, what is best thing which will make Human Life Perfect, and what is perfection of Human Life. ) purpose of human life is not to live like animal cuz every`1 at present time doing 4 thing which are sleeping, eating, s.ex & fear. purpose of human life is to become freed from Birth after birth, Old Age, Disease, and Death.
2
General Discussion / Learning Electronics
« Last post by Dltarnnr on August 20, 2021, 10:45:00 AM »
My capacitor question didn't go well and I get it. Traveling to job sites I have an array of discarded electronics from Apple computers to Sony
3
Robotics / Re: Scorbot-ER V+
« Last post by BriggTrim on August 10, 2021, 03:51:52 AM »
Hi....you likely ought to check the voltages since I didn't see that within the manual. the prop needs 3.3V but 5V can be associated as long as you run it through a 1K inline resistor. The thing I couldn't tell is whether the emittor is fueled from the controller or not, you likely got to take after the encoder wiring and work out whats anticipated. Too with the yield, it may be 0/5V or it may well be open collector so you would like a pull-up resistor. Take a see and see in case you'll be able discover a portion number on the opti isolators. You haven't specified the engines - the manual says 12V engine in spite of the fact that the controller drives them at 24V. So the thing to work out is the current draw.
https://www.7pcb.com/
4
General Discussion / Capacitors
« Last post by Dltarnnr on August 07, 2021, 08:59:29 PM »
This is all new to me . Took a 35v cap from one of the boards I unsoldered. Tried charging it and led only lasted a few seconds. What went wrong?
5
ICs and Discrete Components / Re: Where do you buy electronic components?
« Last post by Jackbell on November 19, 2020, 03:05:58 AM »
Guys, I searched cd2281gp and found Jotrin in the first place. I also browsed the website. There are many types of electronic components and a wealth of information. I will learn more about the website.
6
ICs and Discrete Components / Where do you buy electronic components?
« Last post by Jackbell on November 09, 2020, 01:14:23 AM »
What aspects do you consider when buying electronic components? Such as price, packaging format, data sheet, etc. Are there others?
7
Robotics / Re: Scorbot-ER V+
« Last post by jirik on June 22, 2020, 04:46:53 PM »
Thanks for your responses and information. Robot is still a bit slow and sloppy, alltough it moves.

I downloaded and installed those robot control pc- softwares (ATS for Controller A and Scorbase Pro for scorbot-er 5+) found in intellitec site.

Both seem to be able to control the robot, but something is wrong;
- Robot is able to home when [run]-[0]-[enter] from teach pendant (moves slow and smooth) but homing commanded by pc software thru rs232 starts a very fast and not so smooth movement sequence. Usually it fails at axis 1 or axis 2. Those have lots of play anyways but.. There´s quite a bit of difference in those sequences.

Also the XYZ movements seem nothing like move along-x/-y or -z axis. Z is closest to moving straight up and down. Others move.. in all directions -with a curve- at the same time. Definately not in a straight line as I saw saw more modern robots move in my previous workplace.
I thought it might be some programmed coordinate planes, but memory backup battery was flat. Doubt this robot has eeprom etc?

Axis 2 motor had it´s motor wires just twisted together. I soldered them, but maybe it was wrong polarity?
8
Robotics / Re: Scorbot-ER V+
« Last post by ElectroNick on June 17, 2020, 10:12:44 PM »
When back to read what I myself wrote more that 10 years ago now  ::)
The motors are GM9413-F Pittman, and I'd be damned if I can find them anywhere anymore. But there are many GM94xx- series motors on eBay that you can use for parts. Just a word of caution - not all the gears can be the right size if you're buying one with very different gear ratio
9
Robotics / Re: Scorbot-ER V+
« Last post by ElectroNick on June 17, 2020, 10:08:00 PM »
At the moment robot is mounted on the control cabinet top cover with three M6 screws.
Robot - 8mm Aluminium plate - Cabinet top cover. Is not-so-sturdy base source for trouble?
You're probably going to find yourself opening that cover too often for it to be convenient - the motors drive boards have overcurrent protection breakers that you will need resetting from time to time. At least that's what I remember from using it with a different robot (ERVII)

Problems encountered so far:
- Axis 1 and 2 -> Worn bearings/gears in the servos. Fast homing (pc control) usually fails, slow homing started by teach pendant usually finishes. Are spare parts available for those gearboxes?
- Axis 2 - if arm is about horizontal, I get error of "IMPACT AX[2]" if trying to move that axis 2 up faster than ca. 38% speed.

As far as spare parts for the gearboxes - those are Pittmann motors and gearboxes. Ironically, I live not even 10 miles from the factory where they are (were? I'm sure nowadays everything is made in China, although the Pittmann factory is still here) manufactured, which does not make it any easier for me to procure them. I forgot the exact model of the motors, but they are insanely expensive ($250-ish if memory serves) , but only because of the longer axle that sticks out further, so you can attach the optical encoder to it.

There are almost identical gearbox motors out there that you can buy in $40 range (cheaper on eBay) that don't have longer shaft, hence cannot be used with encoders, which you can sacrifice for parts - gears to replace the stripped ones in the expensive versions.  I did that in a pinch several times already
10
Robotics / Re: Scorbot-ER V+
« Last post by ElectroNick on June 17, 2020, 09:52:43 PM »
As far as the pinout of the cable, I have the table from an ER VII manual. The robot is different but the controller is the same, Eshed Robotec called it Controller-A. In fact I did run my ERV+ from that controller with the exception of the gripper, for which I needed a special cable that I was not able to procure before selling both the ER VII and the controller...

Anyhow, here is the pinout

Pages: [1] 2 3 ... 10
anything