CNC Files

Here is a collection of various Computer Numeric Control (CNC) files. Basically, most files are various shapes and models I’ve designed and the GCode programs to produce (laser cut) them.

Retro Rocket

This download contains SVG source files as well as G-Code NGC files for the two parts of this model – the rocket and the stand are in separate files. More notes about this model are here.
GCode and SVG drawing for the Retro Rocket and Pedestal

McDonnell Douglas DC-10

This download contains SVG source files as well as G-Code NGC files for the two parts of this model. The plane and the stand are in the same file. This is a rather small model, cuts from 3″x6″ piece of foam
McDonnell Douglas DC-10 SVG and CNC G-Code files

Supermarine Spitfire MKII

This download contains SVG source files, DXF files as well as G-Code NGC files for the plane as well as its stand. The plane and the stand are in the same file and a separate file for the stand is provided. This is a very small (postal stamp sized) model, cuts from two 1.5″x1.5″ pieces of foam
CNC Files for the postal stamp-sized Supermarine Spitfire MKII model

Lockheed P-38J Lightning

This model is the same 1:212 scale as the Spitfire model above.
This download contains SVG source files and G-Code NGC files for the plane as well as its stand. This is a very small (postal stamp sized) model, cuts from three 1.5″x1.5″ pieces of foam

CNC Files for the postal stamp-sized Lockheed P-38J Lightning model (ZIP)
CNC Files for the postal stamp-sized Lockheed P-38J Lightning model (RAR)

Bumblebee – the miniature rocket model

This download contains SVG source files and G-Code NGC files for the model rocket. This is a very small (postal stamp sized) model, cuts from three 1.5″x1.5″ pieces of foam. More about this laser cut rocket model here
CNC Files for Bumblebee – the miniature laser cut rocket

License

Unless otherwise noted, all files on this page are licensed under the Creative Commons Attribution 3.0 Unported (CC BY 3.0) License. This license lets you distribute, remix, tweak, and build upon our work, even commercially, as long as you credit Elabz.com for the original creation. We would like you to make attribution to this work by placing a Web link to Elabz.com ( http://elabz.com , no “www”) on any Web page that describes or distributes original or derivative material downloaded from here.

Acknowledgements

Unless otherwise noted, all files have been prepared on a Linux PC running a Ubuntu operating system. The following software was used for creation of the files:

• SVG, DFX files were drawn/converted to in Inkscape – An Open Source vector graphics editor.
• G-Code files were created using DXF2GCODE a free Python program that converts a 2D dxf drawing to CNC machine-compatible G-Code.
• EMC2 was used to control the CNC router that cut these models.